Krause - 4995 Series "Flex-Wing" Tandem Disc Harrow

4995 Series
"Flex-Wing" Tandem Disc Harrow

Features

Model 4995 - 28W shown

3-Section,
27-35 1/2 ft.

A cut above the rest. That's what farmers are saying that have pulled the all new 4995 Series Flex-Wing Tandem Disc Harrows from Krause.

The 4995 is the result of over 83 years of manufacturing experience. In sizes from 27'6" to 35'5", this high performance harrow is ready for your toughest tillage challenges. Just look at the massive main frame. Four front to rear beams provide a massive foundations of strength for this rugged performer. We're so sure of our frames we guarantee them a full three years. * With an average of 470 lbs. per foot of cut, you'll penetrate the toughest primary conditions or finesse the finish on a seedbed.

And our confidence doesn't end with our frame design... Krause's SuperSeal regreasable disc gang bearings carry that same three-year warranty. Like all Krause discs, the 4995 sets the industry standard for a level field finish with their overlapping gang design. Choose from 8" or 9 1/8" blade spacing to match your discing requirements.

All 4995's come standard with the industry leading Rock-Flex cushioned gangs. If your fields have stones or other obstacles order you 4995 as a Rock-Flex model with special ductile iron spools and 1/4" thick blades. But there's a lot more to the 4995 story... read on to find out how the strength and performance of a 4995 can boost your productivity.

The structural integrity of a disc harrow begins with a brawny, welded, main frame. Take a good look at the 4995's... four front to rear beams rather than two like some competitive models. And there's plenty of structural steel strength here with outer beams of 6" x 6" x 3/8" material and inner beams of 6" x 4" x 3/8". Even the center section rocker shafts are full 3/8" thick steel. Krause's offset gang design results in a level field finish... with no uncut balk or need for "middle busters."
Continued on Next Page
Over 7 feet long for unrestricted turns, the 4995 hitch features standard hydraulic self-leveling. The ductile iron tongue bolts into massive 3/4" thick welded steel plates for rugged dependability. A deluxe, telescoping jack that saves time and effort, is standard equipment.
The 4995's forward action wing tandems rotate close to the front gangs for precise depth control and reduced gouging in terraced or rolling conditions. This Krause design advantage limits the need for optional front gauge wheels that are necessary on other brands with wheel placement farther from the front gang. Like the main frame, outer beams are 6" x 6" x 3/8" and inner beams are 5" x 4" for even weight distribution and residue cutting penetration.

Reliability and Performance Features
Krause's heavy-duty walking tandem system smooths out rough fields, and rough roads when transporting. You'll enjoy more precise depth control and more stable discing with walking tandems. This important feature is standard on the center section of all 4995's and optional on wing sections of all models. Compare the Krause design of mounting the massive "L" shaped rocker shafts to both the inner and outer front to rear frame beams, to competitive models that mount only to the outside beam. The greater strength and added durability of the Krause design is obvious.
True to Krause's commitment to long term durability, you'll find no plastic components in our rocker pivots... only case hardened steel pins with replaceable steel bushings. Krause's lift system minimizes the amount of toque through the pivot points with the hydraulic cylinders acting directly on the wheel arms. With an occasional greasing you'll never need to worry about replacing them!
Side to side leveling is easily fine-tuned with simpled eye-bolt adjustments - one on each wing.