Krause - 4830 Series In Line Ripper

4830 Series In Line Ripper

Rigid Models (4 row to 7 row)
Folding Models (6 row to 9 row)

4830 Shank System

The Krause 4830 shank system utilizes a straight-leg shank design, with a narrow, 3/4", lower shank profile. This combination results in a very narrow opening profile in the sub-soil cross section. Soil "flows" around the shank in a smooth, controlled lifting action (laminar). The Krause. laminar flow design minimizes soil heaving and creation of large clods, resulting in minimal topsoil and residue disturbance. Maximum cross-row fracturing is achieved with the 5", chromium carbide shattering wing attachment.
Krause's Spring Reset shanks feature a straight leg design for smooth soil flow. Shank point load is 2500 lbs. with a generous 20" trip height to clear field obstacles. The shanks automatically reset without the need to raise the unit out of the ground... a real time saving feature in rocky soils. Krause's exclusive shank design features a narrow, 3/4" thick lower portion (where the shank engages the soil), for minimal residue disturbance. The upper portion of the shank is 1 1/4" thick for added strength. A reversible, chromium carbide wear bar is standard equipment to protect the soil engaging surface from wear. Maximum shank working depth is 16" with 36" of underframe clearance.
Rigid, shear-bolt shanks are a lower cost choice for soils where rocks or other obstacles are not of concern. The rigid shank utilizes the same straight-leg, shank lower as the Spring-Reset version, but with a shear-bolt protected shank mounting. Thickness at the lower, soil engaging portion of the shank is 3/4", with the heavier 1 1/4" thickness in the upper shank for added strength. A reversible, chromium carbide, shank wear bar is standard equipment. Maximum shank working depth is 16" with 36" of underframe clearance.
PathFind'r™ Shank for Contours
	The PathFind'r™ Shank features an exclusive pivoting design that allows the shank to deflect up to 6 degrees on each side for a total of 12 degrees of movement. The PathFind'r™ shank is a Spring Reset design adn accepts all Krause In-Line Ripper Points and attachments	Unique Advantages Makes deep ripping possible on contours or teraces Deflects impacts for improvced performance in rocky soils Easier, smoother steering under full power with tracked tractors Reduces stress on implement frame and three-point tractor hitch