4500 Series
"Flex-Wing" Coulter Chisel

Features, Specifications & Options

Graphic:Model 45519A Flex-Wing Coulter Chisel
Model 4519A shown with rigid shanks

17 - 25 ft.

The Krause 4500A Series Flex-Wing Coulter Chisels perform two operations at one time, stalk slicing and chiseling. The rugged 4500A Series feature a 180 degree wing fold for convenient road transport. The massive 4" x 5" structural steel frame is cross braced and gusseted at major stress points for reliability and long life. The 4500A's ability to work through deep hardpan makes it an excellent choice for primary fall tillage.

Graphic:4500A fold design The 4500A's unique 180 degree wing fold design makes roading and storing these large Flex-Wing machines as easy and convenient as a much smaller rigid unit.

5800 Series Specifications
*Approximate Roading height of
4500 Series folded is 8'6".


 Rigid
Clamp
Shank
1 1/4"x
2"x
30"
Approx.
Ship.Wt.		 Shear
Bolt
Shank
1 1/4"x
2 1/2"x
32"
Approx.
Ship.Wt.		 Spring
Cushion
Shank
1 1/4"x
2"x
32"
Approx.
Ship.Wt.		 Spring
Reset
Chisel
Shank
2 1/2"x
1 1/4"x
32"
Approx.
Ship.Wt.		 Approx.
Roading
Width
Model No.
Shanks		 No.
Coulters		 Approx.
Cutting
Width
4513A 13 26 17'4" 7852# 7868# 8802# 9280# 11'
4515A 15 30 20' 9324# 9342# 10411# 10972# 11'
4517A 17 34 22'8" 10312# 10327# 11531# 12393# 13'6"
4519A 19 38 25'4" 10777# 10787# 12137# 13179# 13'6"


Standard Equipment
Continued on Next Page
STANDARD EQUIPMENT

Hitch
Tongue type (2" pin hole)

Safety Chain
Tongue Jack

Blade Spacing
8"

Coulter Blades
20"- 6 ga. plain edge

Cast Iron Spools

Tie Rods
1 1/2" diameter alloy

Tie Rod Wrench
Bearing Arms
Flexible C-type

Regreaseable Superseal Bearings
Encased in rubber

Trash Bars

Shank Spacing
16"
 


4" Twisted Shovels
(three piece)

Wheels
4513A is equipped with (2) 16"x10" center frame wheels only. Wings are NOT equipped with rocker shaft mounted wheels. See option list for manual crank adjustable wing gauge wheels.

Tires
4513A; (2) 12.5L x 16" 12-ply
4515A; (2) 12.5L x 16" 12-ply center
(1) 10.00 x 15" 8-ply on each wing
4517A, 4519A;
(2) 11.00 x 16" 12-ply center
(1) 10.00 x 15" 8-ply on each wing

Depth Control
(4) re-phasing hydraulic cylinders
(2) on 4513A

Wing Lift
(2) 4" x 24" hydraulic cylinders

180 Degree Wing Fold
Weighted Front and Rear Beam
Approximate Roading Width 11' or 13'6"

Krause Corporation, 305 S. Monroe, Hutchinson, KS 67501
Copyright 1997-2008 Kuhn Krause Inc., All rights reserved