 |
2200 Series
Tandem Disc Harrow
Features, Specification & Options
|
|
|
Model 2236N shown with 22" disc
blades on 8" spacing
Rigid, 12 - 16 ft.
|
- Big, sturdy frame of 3" x 4" steel
tubing features all-welded construction with extra reinforcing
at all stress points. Gang beams are 3" x 5"
steel tubing for additional strength.
- Heavy duty, spring-cushioned hitch is made of
two 2" x 5" steel tubes. Hose carrier, jack,
and clevis type hitch (1 1/4" pin hole) are all standard
equipment. Available as options are tongue type hitch
clevis with 1 1/2" pin hole.
- Adjustable front and rear gangs can be locked
at three different angles. Front gangs have positive adjustments
of 15°, 18°, and 21°. Rear gangs have positive
adjustments of 12°, 15°, and 18°.
- Staggered, overlapping front gangs eliminate
the strip of uncut ground left by conventional disc harrows.
This feature also allows uniform cutting action across
the full width of the unit, providing excellent chemical
incorporation.
- Flotation tires (9.5L x 15") are mounted
on 15" x 8" wheels as standard equipment. Dual
9.5L x 15" tires are optional for larger units. Hubs
are precision machined and regreasable with beg 2"
spindles to provide years of dependable service.
- Depth is hydraulically controlled with a 4"
x 8" hydraulic cylinder, which operates the big 4"
rockershaft. Wheel arms are constructed of two reinforced
steel members for added strength.
- Rugged scraper assembly is mounted high on the
frame for optimum trash flow. The entire assembly is fully
adjustable.
- Notched outrigger blades with loop type trash
guards are standard equipment. They eliminate ridges left
by the front gangs for a uniformly level field.
- Trail hitch is standard equipment. It may be
used to pull a grain drill, packer or any other tool used
in conjunction with tandem disc harrows.
- Big tie rods and heavy cast iron spools provide
the strength needed for heavy discing. The 1 1/2"
alloy tie rods have a nut at each end for ease of servicing.
Heavy cast iron spools are precision machined for a tight
fit against disc blades. High carbon 22" plain or
notched blades are available in a choice of thicknesses.
|
|
2200 Series Specifications on Next Page
|
2200 Series Specifications
| |
22 inch Blades
|
| Model |
Disc
Spacing |
Approx.
Cut Width |
Approx.
Opr.Wt. |
Approx.
Wt./Blade |
|
STANDARD
MODELS
|
| 2232N |
8" |
12'4" |
3858# |
102# |
| 2234N |
8" |
13'7" |
4090# |
98# |
| 2235N |
8" |
14'10" |
4425# |
96# |
| 2236N |
8" |
16'2" |
4646# |
93# |
| 2232W |
9 1/8" |
12'3" |
3731# |
110# |
| 2234W |
9 1/8" |
13'9" |
3968# |
105# |
| 2235W |
9 1/8" |
15'3" |
4573# |
114# |
| 2238W |
9 1/8" |
18'1" |
5019# |
104# |
|
ROCK-FLEX
MODELS
|
| 2232NR |
8" |
12'4" |
4297# |
113# |
| 2234NR |
8" |
13'7" |
4513# |
108# |
| 2235NR |
8" |
14'10" |
5027# |
109# |
| 2236NR |
8" |
16'2" |
5240# |
105# |
| 2232WR |
9 1/8" |
12'3" |
4132# |
122# |
| 2234WR |
9 1/8" |
13'9" |
4353# |
115# |
|
|
|
Krause
Corporation, 305 S. Monroe, Hutchinson, KS 67501
Copyright 1997-2008 Krause Corporation, All rights reserved |
|
