Rigid,
10-15 Ft.
3-Section,18-31 Ft.
5-Section, 36-42 Ft. |
|
The 6150 Landsman XT marks the introduction of a new class
of tillage implement... one that combines primary and secondary tillage
with seedbed finishing...in one pass. |
6150
Landsman XT Specifications
| Model |
Approx.
Cutting Width |
No. Blades |
No.
XT 270 Shanks |
No.Field
Cult.Shanks |
Transport
Height |
Transport
Width |
Approx.
wt.lbs. |
| Non-Folding Models |
| 6150 |
10'0" |
12 |
5 |
8 |
- |
10'0" |
5442 |
| 6152 |
12'0" |
16 |
5 |
12 |
- |
12'6" |
6018 |
| 6155 |
15'0" |
20 |
7 |
14 |
- |
16'3" |
7125 |
| 3-Section Models |
| 6158 |
18'0" |
24 |
9 |
16 |
9'6" |
12'0" |
9729 |
| 6161 |
21'0" |
26 |
9 |
20 |
11'0" |
12'0" |
10,266 |
| 6164 |
24'0" |
32 |
11 |
22 |
12'6" |
12'0" |
11,967 |
| 6167 |
27'0" |
36 |
11 |
26 |
12'6" |
14'11" |
13,543 |
| 6171 |
31'6" |
40 |
13 |
30 |
14'6" |
14'11" |
15,046 |
| 5-Section Models |
(*17' at wing tires) |
| 6177 |
37'0" |
50 |
17 |
32 |
13'6" |
*14'11" |
17,877 |
| 6182 |
42'0" |
54 |
19 |
38 |
13'6" |
*14'11" |
19,829 |
Weights shown are based on units equipped with 2-Piece K-Tines and
three-row tine/reel attach. |
Standard
Equipment
- Blade Spacing: 9 1/3"
- Disc Blades: 20" 6 ga. plain sharp edge,
(2) 18" taper blades
- Disc Gangs: spring cushioned, screw type depth
adjustment
- Disc Bearings: regreaseable SuperSeal
- Disc Scrapers: rigid
- Depth Control: single location remote
- Hydraulics: all hoses and cylinders
- Hitch:
- Models 6152, 6155 ductile clevis (for 1 3/8" dia.
pin)
- Models 6158, 6161, 6164, 6167, 6171, 6177, 6182 ductile
- tongue type (for 2" dia. pin)
- Safety Chain
- Shanks, XT 270 26" spring reset, 3/4" thick
edge-formed (front rank only)
- Shanks, field cultivator:
- Heavy-duty 2-piece K-Tine or "C"-type, spring cushioned
both are edge formed, low draft design)
- Shank Spacing, 9" (XT 270 27" on same beam)
- Sweeps: Xt 270; 10", 2-Piece K-Tine and
"C"-Shanks; 10"
- Tie Rods: 1 1/2" diameter alloy
- Tires:
- 6150, 6152, 6255- (4) 9.5L x 15" 6-ply
- 6158, 6161- (4) 9.5L x 15" 6-ply center (2) 11L
x 15" wings
- 6164- (4) 9.5L x 15" 8-ply center (4) 9.5L x 15"
6-ply wings
- 6167, 6171- (4) 10.00 x 15" 8-ply center (4) 9.5L
x 15" 6-ply wings
- 6177- (4) 12.5L x 16" 14-ply center (4) 9.5L x
15" 6-ply inner wings (2) 9.5L x 15" 6-ply outer wings
- 6182- (4) 12.5L x 16" 14-ply center (4) 9.5L x
15" 6-ply inner wings (2) 11L x 15" 6-ply outer wings
- Tongue Jack
- Transport Light Kit
|
Optional
Equipment
- Disc gangs: hydraulic depth adjustable
- Rear Jack Stand
- Disc Blades: 20" 6 ga. "incorporator"
blades
- Packer Hitch
- Walking beam tandems (wings, Model 6158, 6161)
- 3-Row Tine 16" (High-Residue)
- 3-Row Tine/Reel (16" High-Residue)
- 3-Row Spike/Reel (High-Residue)
- 4-Row Tine 16"
- 5-Row Spike
- Shank Spacing, 7" (2 piece K-tine or "C"
shanks only)
|
|
