Rigid,
10-15 Ft.
3-Section,18-31 Ft.
5-Section, 36-42 Ft. |
|
The 6150 Landsman
XT marks the introduction of a new class
of tillage implement... one that combines primary and secondary tillage
with seedbed finishing...in one pass. |
| Here's what makes the Landsman
XT so different from other one-pass tools: Optimum disc spacing of
9 1/8" increases penetration. Following the disc gang is one
row of rugged XT 270 spring reset shanks to break up tough or previously
untilled soils. Following the XT 270 shanks comes five rows of field
cultivator shanks, either heavy-duty 2-Piece K-Tines or spring cushioned
"C" shanks, to complete secondary tillage. Or you can choose
a 6150 Landsman set up with all field cultivator shanks if you prefer.
Finally, your choice of one of five rear finishing attachments follows
up to complete chemical incorporation and seedbed firming. The
Landsman XT helps you save time, tillage trips, residue... and money!
|
 |
Krause's new XT 270 heavy-duty spring reset shanks
are in a class by themselves. With a 270 lb. point loading,
10" trip height and 3/4" edge formed design, it's easy to
see why. XT 270 shank feature 26" underframe clearance. |
 |
Heavy-duty 2-piece K-Tine is an ideal choice
for tough conservation conditions. Massive 1/2" x 3"
upper leaf spring and an edge formed 5/8" thick lower shanks
provide a substantial 180 lb. point load measured at average working
depth! Shank underframe clearance is a residue tolerant 25".
Edge formed shank design means less draft and less residue buried
compared to old style shanks used on most competitors units. |
|
|
| Krause engineers designed an all new
Hi-Residue 3-row tine harrow and 3-row tine and reel combination for
the Landsman XT. All-new, hi-clearance mounting arms, 7/16"
x 16" tines, with each tine bar mounted and spring tensioned
individually, allow this innovative new harrow to "walk"
residue through without "dragging and bunching." New Hi-Residue
spike and reel combination is also available. |
 ![Graphic:Roading]()
Krause Landsman's three-or five-section design allows wings to be
hydraulically folded over-center for roading. The 36 and 42-foot models
fold for a transport height of just 13'6". |
|
