 |
|
Features
No-Till Shank System
Shank Systems
Points and Wings
Profit Till System
Specifications
|
4830 Series In Line Ripper
Rigid Models (4 row to 7 row)
Folding Models (6 row to 9 row)
|
|
|
4830 Shank System
|
 The
Krause 4830 shank system utilizes a straight-leg shank design,
with a narrow, 3/4", lower shank profile. This combination
results in a very narrow opening profile in the sub-soil cross
section. Soil "flows" around the shank in a smooth,
controlled lifting action (laminar). The Krause. laminar flow
design minimizes soil heaving and creation of large clods,
resulting in minimal topsoil and residue disturbance. Maximum
cross-row fracturing is achieved with the 5", chromium
carbide shattering wing attachment. |
 Krause's
Spring Reset shanks feature a straight leg design for smooth
soil flow. Shank point load is 2500 lbs. with a generous 20"
trip height to clear field obstacles. The shanks automatically
reset without the need to raise the unit out of the ground...
a real time saving feature in rocky soils. Krause's exclusive
shank design features a narrow, 3/4" thick lower portion
(where the shank engages the soil), for minimal residue disturbance.
The upper portion of the shank is 1 1/4" thick for added
strength. A reversible, chromium carbide wear bar is standard
equipment to protect the soil engaging surface from wear.
Maximum shank working depth is 16" with 36" of underframe
clearance. |
Rigid, shear-bolt shanks are a lower cost choice for soils
where rocks or other obstacles are not of concern. The rigid
shank utilizes the same straight-leg, shank lower as the Spring-Reset
version, but with a shear-bolt protected shank mounting. Thickness
at the lower, soil engaging portion of the shank is 3/4",
with the heavier 1 1/4" thickness in the upper shank
for added strength. A reversible, chromium carbide, shank
wear bar is standard equipment. Maximum shank working depth
is 16" with 36" of underframe clearance.
|
PathFind'r™
Shank for Contours
|
 |
The PathFind'r™
Shank features an exclusive pivoting design that allows the
shank to deflect up to 6 degrees on each side for a total
of 12 degrees of movement.
The PathFind'r™ shank is a Spring Reset design adn accepts
all Krause In-Line Ripper Points and attachments |
|
Unique Advantages
- Makes deep ripping possible on contours or teraces
- Deflects impacts for improvced performance in rocky
soils
- Easier, smoother steering under full power with tracked
tractors
- Reduces stress on implement frame and three-point tractor
hitch
|
|
|
Printable
Version
Request
More Information