 |
|
Specifications
& Standard Equipment
|
4400
Series
"Flex-Wing" Packer
Features, Specifications, and Equipment
|
3-Section,
20 - 36 ft.
|
Model 4436 shown |
The Krause 4400 Series Flex-Wing Packers offer more time
and money-saving features than any other packers on the market.
Krause packers pulverize clods, press down stones and eliminate
air pockets in the soil, resulting in a superior seedbed to
give your crop an extra edge right from the start.
Krause's innovative use of massive 6 5/8" roller
axles eliminates the need for troublesome middle gang bearings,
and eliminates the "skip" in the tilled
soil due to the space taken by the middle gang bearing. The
6 5/8" diameter roller axles are up to twice as strong
as the 4" diameter axles used on some competitive models.
Transport wheels clear the soil by several inches eliminating
wheel tracks in the seedbed. Front and rear gangs may be set
to overlap, so there are no unworked strips, even when flexing
over hills or terraces.
The 4400 Series Packers are offered in working widths from
20' to 36' to meet the needs of today's large farming operations.
All Krause Packers feature "cross-fold"
design for convenient road transport.
|
 |
Telescoping Tongue
Models 4428 - 4436 (28' through 36') have an extendable tongue
to enable shorter turns when the unit is being pulled behind
another tillage implement. The telescoping tongue
increases tongue length from 13'4" to 18'4".
The tongue may be retracted for road transport or more convenient
storage. |
 |
Super
Seal Bearings
Krause "SuperSeal" regreaseable bearings are used
on 4400 gang axles to ensure long life and rugged durability.
Since there are no middle gang bearings, the "SuperSeal"
bearings can be easily removed from the gang for servicing,
without disassembling the gangs, a time and labor saving feature
you'll be sure to appreciate. |
 |
V-Pack
Wheels
4400 VP Series Packer feature 22 3/8"
diameter by 1 3/4" wide V-pack wheels on 7 1/4"
spacing. The "V" shaped packer wheels create a "corrugated"
field finish to fight wind erosion in sandy soils. Tie rods
on the VP Series are 1 1/2" diameter alloy and utilize
"Superseal" Bearings. |
4400
Series Flex-Wing Packer Specifications
| Model |
Approx.
Working
Width |
Center
Working
Width |
Wing
Working
Width |
No.
Packer
Wheels |
Approx.
Shipping Wt.,
w/Cast
Wheels |
Approx.
Shipping Wt.
w/Ductile
Wheels |
| 4420 |
*20'-4" |
11'-8" |
4'-4" |
61 |
5665 |
5141 |
| 4422 |
*22'-4" |
11'-8" |
5'-4" |
67 |
5950 |
5374 |
| 4424 |
*24'-4" |
11'-8" |
6'-4" |
73 |
6224 |
5597 |
| 4426 |
*26'-4" |
11'-8" |
7'-4" |
79 |
6509 |
5830 |
| 4428 |
*28'-4" |
11'-8" |
8'-4" |
85 |
7290 |
6559 |
| 4430 |
*30'-4" |
11'-8" |
9'-4" |
91 |
7575 |
6793 |
| 4432 |
*32'-4" |
11'-8" |
10'-4" |
97 |
7921 |
7087 |
| 4434 |
*34'-4" |
11'-8" |
11'-4" |
103 |
8329 |
7444 |
| 4436 |
*36'-4" |
11'-8" |
12'-4" |
109 |
8620 |
7683 |
|
4400 VP SERIES
(V-PACK GANGS)
|
| 4426VP |
27'2" |
11'-6" |
7'10" |
45 |
5743# |
-- |
| 4428VP |
28'4" |
11'-6" |
8'5" |
47 |
6380# |
-- |
| 4430VP |
30'9" |
11'-6" |
9'-8" |
51 |
6642# |
-- |
| 4432VP |
33'2" |
11'-6" |
10'-11" |
55 |
7031# |
-- |
| 4434VP |
34'5" |
11'-6" |
11'-6" |
57 |
7295# |
-- |
| 4436VP |
36'10" |
11'-6" |
12'-8" |
61 |
7562# |
-- |
Horsepower requirements
are approximately 1-2 drawbar horsepower per foot of rolling
width.
*Alternate set-up allows deletion of 2 packer wheels, reducing
working width by 8". |
|
STANDARD EQUIPMENT
Hitch
1 1/4" clevis type
Tongue Jack
Notched Rollers
4" x 20" cast iron
Roller Axles
6 5/8" diameter steel pipe
Roller Bearings
regreaseable SuperSeal bearings
Wheels
Models 4420-4426;
(2) 15" x 8"
Models 4428-4436;
(4) 15" x 8"
Tires
Models 4420-4426;
(2) 9.5L x 15 8-ply
Models 4428-4436;
(4) 9.5L x 15 8-ply
Hitch Leveling
ratchet jack leveling
Telescoping Tongue
Models 4428-4436;
13'-4" to 18'-4"
|
Depth Control
4" x 16" hydraulic cylinder
Wing Lift
Models 4420-4430;
(2) 4" x 24" hydraulic cylinders
Models 4432-4436;
(2) 4 1/2" x 24" hydraulic cylinders
All Hydraulic HosesTransport Width
Models 4420-4434; 12'-4"
Model 4436; 13'-10"
Transport Height
6'-11" to 8'-4"
Transport Length
16'-5" to 23'
Road Clearance
12"
Safety Chain
Transport Locks - automatic on all Models
|
|
|
Printable
Version
Request
More Information